Torque specs for 01 mazda prodege es 2.0 - Mazda Cars & Trucks

Question edited for clarity.
Question moved to model category.

The Tecnical Manual has torque specs. Press CTRL+F and type the word 'torque' and press Enter. There are 7 mentions including a table.

Training Manual - Mazda BT-50

mazdabg.com https://www.mazdabg.com > BT-50_en
The dual mass flywheel compensates torque fluctuations thus reducing rattle noises of the transmission gears. BT-50_05014. 1 Torsional-vibration damping spring.
146 pages

https://www.google.com/search?q=2010+Mazda+BT50+torque+specs

..

Its a bit of a process.
Here is a link with the specs
http://www.autozone.com/repairguides/Mazda-Tribute-2001-06/Specifications/Torque-Specifications/_/P-0996b43f8037ff85

The torque the engine produces, or a bolt torque?

year make model engine torque
year make model (the part) torque specs

https://www.google.com/search?q=2007+mazda+cx7+engine+torque+specs

..

I don't understand why so many people ask for torque specs. Buy a cheap shop manual and you will get all the specs, torque patterns, information one which head bolts are one time use, and much more.

The Mazda T3500 truck requires a specific torque for its bolts. According to [1], it requires a torque of 60 pounds for the first stage, 70 pounds for the second stage, and 80 FT Pounds for the final stage. Additionally, in [2], it is recommended to refer to the STANDARD BOLT AND NUT TIGHTENING TORQUE in Section TD for tightening torques which are not mentioned in the main text. Furthermore, [3] suggests that one should check the oscillation torque of the connecting rod. If the large end does not drop by its own weight, it is important to replace the piston, connecting rod, and/or piston pin.

**References:**

[1] [Torque specs for Mazda T3500 truck - Fixya](https://www.fixya.com/cars/t18472768-torque_specs_mazda_t3500_truck)

[2] [Mazda T3000, T3500, T4000 Workshop Manual](http://www.retroanaconda.com/landrover/manuals/mazda_t3000_t3500_t4000_wsm.pdf)

[3] [Mazda T3000 T3500 T4000 Workshop Repair Manual PDF](https://ru.scribd.com/document/361910842/mazda-t3000-t3500-t4000-workshop-repair-manual-pdf)

What is the front axle torque on a 2004 Mazda 6

Three stages with new bolts (a must), 1st 60 pounds, then 70 pounds then final torque is 80 FT Pounds.

CAMSHAFT BEARING CAPS TORQUE TO 125 INCH POUNDS. CAMSHAFT SPROCKETS - 44 FT LBS. YOU NEED A REPAIR MANUAL LIKE A CHILTON WITH CAMSHAFT TORQUE SEQUENCE DIAGRAM. YOU HAVE 20 CAMSHAFT CAP BOLTS THAT HAVE TO BE TORQUE IN SEQUENCE.

I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below