Here are the torque for the head bolts
http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf
SOURCE: looking to find out the torque settings for a golf
give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
SOURCE: golf iv 1.6 8v cylinder head torque settings
hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins
2nd stage 60nm leave 5 mins
3rd stage 90 degrees leave 10 mins
4th stage 90 degrees
then you are done i will try put order on here i hope this works as follows
10 4 2 6 8
front of engine back of engine
7 5 1 3 9
in that order hope this helps
SOURCE: Looking for torque settings on
According to a famous car manual it says to 'tighten by hand DO NOT use any tools', If in doubt ask a sturdy friend to apply a little more force.
SOURCE: looking for torque settings and
45lbs then stage to you rotate another 90 degrees then another 90 degrees as stage 3
25 views
Usually answered in minutes!
×