Can you help me please I'm attempting to add the message center to my 02 explorer xlt but have no idea how to wire it up to work correctly

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

SOURCE: FORD EXPLORER XLT 1992 parts diagram

get a haynes manual for 20 dollars. or the library will have it more than likely.the other option is to remove the part.it has a part#on it if it is not totally ruined

SOURCE: On a 1999 ford explorer XLT the radio will only

sounds like a wiring issue. I'd start by checking the wires around the radio and see if they are chaffed or broken.

Chris Weber

• 131 Answers
• Posted on Mar 17, 2010

SOURCE: need help to find computer module on a 2002 Ford

The PCM is in the firewall on the passenger side and work to remove it is done under the hood and from the passenger footwell.

SOURCE: 1997 Ford Explorer Power Seat Wiring

There are several options. It all depends on how bad you want the leather seats. You could disassemble the seats and transfer the upholstery from one seat to the other, or you could transfer the motor mechanisms from one seat to the other. The leather seats are most likely equipped with seat heater elements...there is no way you are going to get them to work without redesigning half of the vehicle, so you can either leave the heating elements out when you transfer the upholstery or just leave their respective connectors disconnected.