1998 chevy blazer reset antilock - 1998 Chevrolet Blazer

dave smith

• 94 Answers
• Posted on Feb 27, 2009

SOURCE: cylinder 2 misfire on a 1998 chevy blazer

check your plug wires for tears and dont overlap them

SOURCE: 1998 Chevy blazer radio wiring diagram

http://www.the12volt.com/installbay/stereodetail/435.html

SOURCE: can't find the oil filter on 1998 chevy blazer

there is a black cover right under the front of the blazer tha says oil filter acess

SOURCE: Does my 1998 chevy blazer have fuel reset switch? 1gndt13w6x2108126

your truck doesnt have a reset or inertia reset switch ---fuse and relays

SOURCE: reset passlock code 1998 chevy blazer

30 Minute Procedure

1. Ensure that the battery is fully charged.
2. Use a scan tool in order to clear the Passlock?"¢ DTCs.
3. Turn the ignition switch from the OFF position to the CRANK position, and then to the RUN position.
The vehicle will start and then stall.

4. Leave the ignition ON until the security telltale turns OFF in 10 minutes.
5. Repeat Steps 3-5 for 2 more times (3 times total)
6. The Passlock?"¢ controller will learn the new data on the next start attempt.
7. Use a scan tool in order to clear all DTCs.

Reset passlock code 1998 chevy blazer

fixya.com