SOURCE: 2004 Saturn Vue Brakes
The vibration is caused by the rotors being warped. Remove the front tires and check the front brake pads. Replace if needed. This is a pretty straight forward job. The rotors are "fall off" rotors and you won't need anything special tool wise.
SOURCE: Handbrake Adjustment
HERE IS A SIMPLE RULE FOR ALL HAND BRAKES, THE ADJUSTMENT IS CORRECT WHEN THE WHEN YOU FEEL WHEELS START TO DRAG AFTER THE HAND BRAKE CLICKS 3 TIMES, IF THE BRAKE DOES NOT START TO DRAG ON THE WHEELS ON THE 3RD CLICK THEN CHECK THE CABLE FOR POSSIBLE BINDING DUE TO INTERNAL CORROSION, ALSO CHECK THE BRAKE PADS FOR GLAZING, IF THEY ARE SHINY USE 80 GRIT EMORY CLOTH AND ROUGH THEM UP, MAKE SURE ALL PARTS ARE WELL LUBED WITH WHITE LITHIUM GREASE.
SOURCE: i have a 2004 saturn vue when i apply the brakes my abs comes on
It sounds like one of your wheel sensors isn't working, and the ABS is thinking that one wheel is locked up, so it's activating ABS.
SOURCE: 2004 saturn vue awd HELP!!
The RDM or Rear Differential Module on these GM vehicles (Vue, Torrent, Equinox) is a known weak point. It is most likely shot as the trans outputs power to the front and rear equally; gearotor pump(s) in the RDM then assign traction to each rear wheel if the wheel is turning slower than the input. So if it is still turning it must not be transmitting that torque to either "braked" rear wheel... There was a recall for the RDM in which GM quietly increased the slippage at which it engauged the rear wheels due to high failure rates...
475 views
Usually answered in minutes!
×