Torque settings for chevy spark b12d engine . Please

Question edited for clarity.
Question moved to model category.

They are all here for B12D, and more in the main link below. images of sequence too.

Engine Aveo 1.2 B12D Specifications PDF

Scribd https://www.scribd.com > document
Fastener Tightening Specifications · Timing Chain Lever Retaining Bolts 10 Nm 7.4 lb ft · Engine Mechanical Specifications · l No. 4 23-23.021 mm 0.9055-0.9063 in.
Rating: 5 · ‎1 vote

https://www.google.com/search?q=B12D1+Torque+settings

The 2014 Chevy Spark intake manifold torque sequence and torque specs depend on the engine type. Here are the torque specs and sequence for each engine type:
1.0L Engine:

• Step 1: Tighten the bolts to 44 inch-pounds (5 Nm).
• Step 2: Tighten the bolts to 89 inch-pounds (10 Nm).
• Step 3: Tighten the bolts to 18 lb-ft (25 Nm).

Torque sequence: 8 4 1 5 9 7 3 2 6 10
1.2L Engine:

• Step 1: Tighten the bolts to 44 inch-pounds (5 Nm).
• Step 2: Tighten the bolts to 89 inch-pounds (10 Nm).
• Step 3: Tighten the bolts to 18 lb-ft (25 Nm).

Torque sequence: 8 4 1 5 9 7 3 2 6 10
It's important to follow the torque sequence and torque specs carefully to ensure that the intake manifold is properly secured and sealed. Over-tightening or under-tightening the bolts can cause leaks or damage to the engine.

usa/canada

https://eautorepair.net/Marketing/Default.asp

read it.

is this a post for a full engine torque settings??
sorry none where but is here,
USA cars only or Canada.
https://eautorepair.net/Marketing/Default.asp


see truth there not internet rumors over rumors(repeats)
do you build engine from internet rumors , really?
evil (can I watch):?
hope I saved you $2000 .

Question edited for maker.
Question moved to category.

2001 Chevy Monte Carlo 3.8L Engine Torque Specs

https://chevy-specs.com > cars > monte3.8 > torque-spe...
2001 Chevy Monte Carlo 3.8L Complete Torque Specs List ; Water Pump Bolts Torque Spec (Long), 15 ft-lbs + 40° ; Water Pump Pulley Torque Specs, 10 ft-lbs.

..

Torque settings can be found in a Chevy maintenance manual or enquire at a Chevy main dealer outlet.

Go on your computer in the browser section and enter - Chevy Spark 800cc engine cylinder Head bolt torque settings. You will get several replies back one of which will be You Tube and that will show you the repair and the head bold torque bolt settings.

Wiring, schematic, electrical diagrams, torq settings, parts info, error/fault codes, full assembly/dissembly, service instructions and a lot moreetc are basic contents of these online books they here on this website https://big-manuals.com/

Unbolt it and remove stuff replace gasket and reverse the order! EASY NO!!!!

Write your answer...hi I need torque settings for 800cc Chevy spark 2005model Big end and mains barring 3cylimder