1998 Volkswagen Beetle Logo
Posted on Jul 01, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

99 VW Beetle Hood Release Cable plastic tab broke

The Plastic Tab on Hood Release Cable that attaches the cable to the Handle snapped I removed the plastic and the handle but can not locate the cable...do I need to replace the whole cable or just the plastic part...

  • nikola432 Jul 01, 2009

    I finally located the cable, it was sneaking from a whole and the metal ball was still on it...
    I called VW, they say that the cable only has the metal balls on the ends... so the part must be from they handle.
    They have the handle in stock, so I'll go and see if the plastic part is part of it

    Thanks

    Nik

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 73 Answers
  • Posted on Jul 01, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jul 01, 2009
Answers
73
Questions
1
Helped
32874
Points
182

The only way to purchase is a whole cable

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hood release handle broke in my 2005 saturn ion how do i get to the cable in the plastic part where the latch broke to grab the cable

Confusing post if your talking about the handle that you pull inside the passenger compartment then unbolt the bracket that it's attached to and you will see the cable ///if you Mean the hood latch safety tab that you lift or move to the side to open the hood after cable release you must disconnect the lock latch or the hood striker that it locks onto and raise the hood this can be done by removing the the front grille panel or by coming in from under the vehicle to unbolt the lock latch assembly from the radiator support
1helpful
1answer

Drivers side hood release handle broke off in cold weather.

use pliers to pull cable and order a replacement latch
0helpful
1answer

How do you open stuck hood release on 2001 vw beetle

very careful, if the handle got disengaged or broke, try grabbing the cable with pliers, don brake it, just pull gently until it opens.
1helpful
2answers

1998 VW Beetle inside hood release handle broken

Their is a cable in the control access the cable and pull on it with a pair of pliers then replace the part
0helpful
1answer

Hood release cable broke, cant open hood

If What type of car? If e39 1997-2003 or 3 series 94-99, easy. buy small inspection mirror. look up by the latch. you'll see where the end cable connects. With a small stubby, move the plastic that the end cable attaches to, you are then moving the latch. Lift up hood. Of course you must pop out the kidney grill to gain access to the drivers side latch, 6 tabs hold it in. Hardest part of whole job is removing kidney grill. moving latch takes about 7 seconds.
0helpful
1answer

When you want to pop the bonnet you firstly release the catch from the passenger side footwell, them you pull the plastic release device which pops out from under the bonnet, if the plastic release device...

At the left floor the cable that releases the hood is behind the kick panel. The plastic handle that broke off can be accessed by removing the panel and you will see the last bit of the plastic handle that is threaded on the steel rod. I an emergency you can grab the rod with pliers and pull to release the hood (bonnet). Go to you local dealer and you can order a new handle or go to a wrecking yard and find your car model and just remove and purchase the used handle. You may be able to grab the rod that the handle broke off from with out removing the panel. Good luck.
2helpful
1answer

Handle inside will not open the hood....

I'm going to tell you how( thinking the handle inside the car broke). This handle is made of plastic(replacement handle is a dealer item, pay to much for it), and the cable behind it usually breaks at the plastic connector. you need a pair of vise grips. attach the vice grips to the cable, and pull. It will release the hood. Now if the cable itself broke going to the hood, you will have to remove the grill( is held in place by screws). Remove the grill, and you will be able to pull the release pin on the hood latch, releasing the hood. hope this helps, and please rate, helpful or not
0helpful
1answer

'99 Honda civic LX. The hood latch requires a lot of force to ope

What you should do is spray the latch with pb blaster,556,or wd40.Shut the hood and after a couple of times it should work better also do a visual inspection of the latch and make sure nothing is bent.
0helpful
1answer

Broken VW New Beetle hood release

try to look for the cable attached to the lever that opens the hood, once you find it pull it, that will open your hood
4helpful
1answer

Broken tab to hood release cable

Get a long screwdriver and try to release the secondary latch that way. Or if you have small hands reach up under the hood and pull the secondary latch toward the left.
Not finding what you are looking for?

1,300 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...