How to chane th eignition switch
The ignition switch is a recall. I had mine first replaced in 2002 when the recall first came out. Then when it went out again in April, 2009, the Honda dealer replaced it again free of charge.
It's really simply. First you have to dismount steering wheel housing. Now go beyond ignition switch and unscrew two bolts. You will see how the wires go to the fuse box located on the left side panel. You will have to break two wires' mounting staps. In emergency, if you have not much time, you can drive only plugging in new ignition wire into fuse box, and turnig it with key or screwdriver but do not forget to put and turn your key to ignition housing to avoid steering wheel to block. Sorry if my English is not smooth, I am from Poland, I had the same problem. The ignition switch was a subject of honda recall and is faulty as I discovered it later.
Hope this helps you.
844 views
Usually answered in minutes!
×