SOURCE: can i purchase/replace just the
its easer with the hub and your not saving much because you need a big press to press the bearing in the hub
SOURCE: 2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT
just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation
SOURCE: 2006 Saturn Vue Wheel Bearing
it should come out once you have disconnected:Brakes,strut,ball joint.tire rod end,cv joint!if it is not put the cv joint nut back on until safe enough to give it a tap with hammer to knock back & out shaft this should come as one piece HUB the bearing is pressed in! better to change whole HUB good luck this hopefully helped you out!
SOURCE: front hub is stuck to knuckle.
spray with penetrating oil and let sit. hit with a big hammer. if it still will not come loose remove knuckle and use a press to remove bearing.
SOURCE: 2002 saturn vue. replacing front bearings. I
have you un bolted the strut and disconnected the ball joint you have to do this to have room for the shaft to come out
Testimonial: "One oclock in the morning, im still working on this POS and he answers my question. Does your mechanic answer the phone at 1 a.m.? Thanks!"
91 views
Usually answered in minutes!
×