At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Get the replacement belt, and then note the pulleys that have smooth finish, and note the pulleys that have the grooved finish.
Just 'thread' the serpentine belt, one pulley after another alternating between the smooth and grooved until the last remaining pulley is the tensioner pulley.
Use the breaker bar to allow the pulley to accept the belt, and you're done.
You have a tension pulley that keeps your belt tight. You will need to relieve the tension on that pulley.Make sure you have a breaker bar long enough to give you leverage. Then you can slip the belt off. There should be a diagram of how the belt is suppose to be installed located on your radiator cover
Here it is
Here it is
Hope this helps ??
3.0 v6
very helpful thanx a million
×