My husband has been working on our daughters beetle for about 2 weeks now and all we need ( hopefully ) is this diagram. The one that is on her car, under the hood, is about rubbed off. Can someone help us please!
VACUUM LINE DIAGRAMS There
are few direct links showing exact vacuum line diagrams. I suggest you to refer
the direct links. Click
the link below: ----- --------------- http://howtobyme.blogspot.in/2012/01/how-to-locate-vacuum-leak.html ----------------- http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html ------------ http://repairhelpcenter.blogspot.com/2011/11/vacuum-diagrams-for-audi-a4.html -------------------- ------------- -------------- ------------- http://technoanswers.blogspot.com/2012/01/vacuum-diagram-for-isuzu.html ------------- http://technoanswers.blogspot.in/2012/02/ford-4-wheel-drive-vacuum-solenoid.html ------------ These
will help. Thanks.
How to locate the vacuum
leak?
Vacuum Hose Routing Diagram
For 1995 Chevrolet Corvette Throttle Body?
VACUUM DIAGRAMS For Audi A4?
VACUUM DIAGRAMS For VW Passat?
http://vwrepairhelp.blogspot.com/2011/11/vacuum-diagrams-for-vw-passt.html
Vacuum line diagram For 1996 Chevrolet
Lumina?
http://schematicsdiagram.blogspot.com/2011/12/vacuum-line-diagram-for-1996-chevrolet.html
Vacuum Hose Routing Diagram For 1995
Chevrolet Corvette Throttle Body?
http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html
Vacuum diagram for Isuzu?
Ford 4 wheel drive vacuum solenoid working
system?
SOURCE: 99 Beetle Serpentine belt diagram
The serpentine belt on my 2001 Beetle loops around the outside of the large pulley closest to the firewall, at the bottom, then goes around the outside of the forward lower pulley, then crosses to the inside of the one right above the forward lower pulley, then loops over the outside of the alternator pulley at the top front side, then goes inside under the tensioner pulley, and back down to the outside of the big rear pulley.
I hope that description makes sense. A picture would work a lot better, but I don't have an easy way to post it. Also, I know you asked about the '99 Beetle, but I assume its routing is the same as the 2001 (which is the one I have).
SOURCE: need vacuum diagram for 1974 vw beetle with 34 pic carb
Depending on your carb, distributor and transmission, you have from zero to two vacuum hoses.
If you have an Autostick transmission, there's a vacuum hose running from a port in the intake manifold to the control valve on the left side wall of the engine bay. (Hint: if you've got a car that came with Autostick and that someone's converted to manual transmission, the bracket for the control valve is the perfect place for your coil.) Most people don't have this transmission even if their car came with it--it's only a three-speed and it's hard to find parts for it, so most of those cars have been converted to manual transmission.
The other hose you might have is for your distributor. The port is on the left side of the carb, and a hose runs between it and the metal vacuum advance can on the side of the distributor. If you have a 009 distributor or an aftermarket distributor like an MSD you don't have the vacuum advance can; if you have an aftermarket carb like a Weber you don't have the port. Therefore...you probably don't have any vacuum lines on your engine.
if only one vacuum line then?
the vacuum line goes from the vacuum advance on the side of the dizzy, to the carburettor, just around the throttle linkage if i recall. hope this helps.
SOURCE: i am working on an 1999 vw beetle with the
I GET THE VAC DIAGRAMS I NEED FROM ONLINE AT AUTOZONE.COM....JOIN UP AND CHECK THEIR REPAIR GUIDES OUT...IT IS SAFE AND FREE
6,182 views
Usually answered in minutes!
×