SOURCE: changing headlight 300m
lift the hood. the light are down behind the light assembly. simply turn large black ring and it will come out. be carefull not to touch the glass on the new one. oil from your skin will cause it to prematurely fail.
SOURCE: low beams don't work. passenger high beam will
SOUND LIKE DIMMER SWITCH BAD.
Testimonial: "thanks for your help. turns out it was just bad bulbs. should have known better than buy cheap bulbs off the net.ruined my old set by taking them in and out of the harness. luckily new bulbs solved the problem.the advice was greatly appreciated though."
SOURCE: headlights don't work, low or high beam-
Light switch bad or check all head lightrelays . 2 dim ones and 2 high beam ones. one is bad.
SOURCE: Right side headlight (low beam) dead
clearly volts without amps. pinch wire bad socket or multifunction switch under cover on steering column.
SOURCE: Left low beam headlight on Chrysler 2003 T&C wont work while engine is on
Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.
3,683 views
Usually answered in minutes!
×