At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Odo meter not working need to change odo claster, how do i change the clasterOdo meter not working need to change odo claster, how do i change the claster
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It needs to be reset, here is how to do it: turn the key on set the odo/trip meter to read odopush and holsd the RESET switch turn the key off while holding the switchturn the key back on some lines will flash on the display when the odometer reading comes back release the switch
if this doesn't work use the "trip A" setting instead of ODO either one should work
Hello: Disconnect the speed sensor on the transmission. not only will the speedo not work but it will also keep it from shifting properly unless its a straight shift.
you will just have to keep driving the car as long as she runs you have a good car that will do you well. as for the trip odometer you will have to reset the computer. disconnect the battery overnight and see what that does for you.
Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.
Odo meter not working need to change odo claster, how do i change the claster
×