Firing order 1993 3.0 liter chrysler lebaron diagram

Check this diagram for 1991 Chrysler Lebaron 3.0 liter SOHC V-6 VIN "3"



Hope this helps (remember to rating this free answer and leave a testimonial comment).

Check this diagram (click for zoom)...

Fig. 9: Timing belt routing and timing mark locations

Hope helps (remember to rate this answer).

Check duplicate answer in this link: firing_order_1993_3_0_liter_chrysler

part store can print out 1993 chrysler lebaron engine belt

Here are the firing order diagrams for those engines and I hope that they will help you solve the problem that you are having. For some reason Ford has listed the same firing order for both engines starting in 1995.



1993 5.0 liter engine firing order.




1993 5.8 liter engine firing order.




1994 5.0 liter engine.




1994 5.8 liter firing order.




1995 5.0 liter engine.




1995 5.8 liter engine.

1-2-3-4-5-6

To remove the serpentine belt from the 3.3L and 3.8L engines, rotate the tensioner assembly clockwise

autozone.com has free diagrams

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1993/make/chrysler/model/lebaron/1993_chrysler_lebaron_drive_belt_routing_diagram.htm

I'm sorry, I don't think you can get a pic for free, this will cost 25 bucks, or look for it on eBay for cheaper, a Haynes repair guide. http://haynes.com/products/?searchType=vehicleApplicationSearch2&searchEnd=yes&sfID1=&sfID2=&sfID3=&year=1993&make=Chrysler&model=LeBaron&x=6&y=6 copy and paste that into your address bar, or click if it's blue.