20 Most Recent
2002 Dodge Intrepid Questions & Answers
How do I replace a 2007 dodge magnum coolant air bleeder assembly?
The upper intake has to come up. The coolant pipe that goes to the back has a clip on it, you can not adjust the pipe until you release that clip. After the upper intake is all the way up, you can see where the pipe comes out the back, just pop it off the clip with a flat screwdriver or small pry bar,After that, the pipe will move easy enough to re-insert it into the assembly before screwing the four bolts back in. Make sure you put a fresh oring to avoid problems. I always add some black silicone for an optimum seal. BTW the lower intake does not have to come out, only the upper. I also found that the engine will shake a little bit if the large pvc pipe on the top back of the upper intake is not sealed properly when reassembled. I solve that issue with a good bead of black silicone too. Make sure to get new intake gaskets if it is the first time popping the upper intake off.
Felpo gaskets will hold up for several removals. I hope this little bit of info helps you DIY guys.
2002 dodge intrepid se 2.7 engine light on got
Anytime a Chrysler product of this year has a check engine light, get it to a dealer immediately. The 2.7 liter engine is notorious for oil sludging. This can be a dangerous problem that can destroy the engine.
Your problem may have nothing to do with oil sludging, and I hope it doesn't; but don't take a chance.
Google "Chrysler engine oil sludging."
11/28/2021 12:26:20 AM •
2002 Dodge...
•
Answered
on Nov 28, 2021
P0440 p0456 2002 dodge intrepid
Hi. Thanks for your question. You can follow some steps to know what could be the exact issue and for tha can visit
https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
On an 02 dodge intrepid where you hook up your
The spindle. U have the u shaped things one on top one on bottom called upper and lower control arms. U have the liitle rod in between both called idler arm or center link. Then u have upper and lower steering ball joints. All of this mounts tonor in some way are centerd on ur word missing spindle. Which the drive axle or cv shaft pass through hope this helps. If u wana know more google compontents of a McPherson strut steering system. Goodluck.
2002 intrepid wont start
Which fuses? failed. You have developed a short somewhere, and the failed fuses will point you to the culprit. You will need to play detective ( or find a good tech to do it for you)
P032 and P0462 code on a 2002 dodge intrepid
typical mechanic
misfiring in injected engines is more from bad injectors that plugs , leads and coils
run a can or quality injector cleaner through the system and if it doesn't improve in a few miles , have the injector serviced
Not finding what you are looking for?