20 Most Recent
1999 Mazda Millenia Questions & Answers
I have a 99 Mazda Millenia and just replaced the
have the fault codes read again somewhere else
there is a code p 0720 which refers to output shaft speed (OSS) sensor---circuit malfunction====causes --wiring---OSS sensor---ECM/TCM
It is a transmission fault but after an engine swap , I would be suspecting harness connection not done properly , cut wire especially if the transmission was performing correctly before the swap
Taking it to a professional transmission shop is good advice , get the quote and failure description and if it can be directly related to the engine swap have that shop pay the bill for the repairs
What does the sillenoid do for 1999 mazda mllenia?
Their are Individual Fuses for many systems, a "Solenoid" is basically a ON/OFF or a Electrical Motor and what they do is open or Close something. My questions is what Happened when they ALL Stopped, have you checked power with a Test Light on BOTH SIDES of the Fuse to ensure you had power Coming IN and Going OUT?
1999 Mazda Millenia thermostat location
Normally follow the upper radiator hose from the radiator to the engine block. That is the thermostat housing. Normally undo the housing and the actual thermostat is in the housing. There a ton of Youtube videos.
Not finding what you are looking for?