20 Most Recent
2006 Dodge Charger Questions & Answers
2006 Dodge Charger limp mode and P2127.
Question edited for clarity.
Question moved to model category.
Yyou can't diagnose issues like this yourself. You need more that a $125 scan tool. You need an auto electrician with a $5,000 bi-directional scan tool computer and the experience to use it. This is all electronics and computer networks and can't be guessed.
P2127 Dodge
The P2127 code means that the throttle or pedal position sensor switch E has a low input
. The pedal position sensor is a sensor found on the gas pedal. The sensor tells the ECU when the gas pedal is depressed and how far it is depressed.
P2127 OBD-II Trouble Code: Throttle/Pedal Position Sensor ...
How do i clear code b223D on dodge charger
This is not an error code. It pinpoints that other error codes might require your attention as it is an OCM (Occupant Classification-ECU) DTC present. The chances that the error is due to an uncalibrated seat. Get it read by a scanner, or take it to a dealer or car mechanic to reset.
My 2006 dodge charger thrown
My 07 dodge charger brake light,abs, esp, bas light on an check engine light on an the hand show u how fast u going don’t work I took it to auto zone an they run a check on it an the code showed up u1120 an u1121i replace the rear brake sensors an drove it around the corner but the lights are still on.
Charger 2006
Have an 08 Charger that had a similar issue (0121, 0480, 1110, 1120, 0121 again), no speedometer, only thing that worked was tachometer. Had all new wiring done while trying to trace the issue-garage couldn’t figure it out. After talking to an online forum, replaced the TIPM relay fuse box (used off eBay for @$100). Solved the problem. And you can do it yourself if you’re even basically mechanical-it’s 5-6 large plug in connectors that can’t fit but one way. You just need a wrench and a screwdriver.
Not finding what you are looking for?