2008 Ford Fusion 3.0 - Answered Questions & Fixed issues
Part of seat gets very hot with seat warmer
So you have real toasty buns, eh? I would unplug the seat warmer for now.. Repair it before it starts a fire in your seat cushion, one of the warming elements has a problem. It will just have to be examined. Check with ford, maybe they have a solution that doesn't involve removing seat and tearing it apart. Sit lightly, wow, talk about being in the hot seat!
Where is the evaporative emission vent control valve located on a 16 ford fusion with the 2 liter turbo engine
I'm going to assume for simplicity's sake that you're talking about the evap canister purge solenoid, I've heard it called the vent control valve several times before, but technically we call it the evaporative canister purge solenoid, and it's located right in the center of the engine compartment at the back right next to the throttle body. The valve is held on with two 8-millimeter hex head bolts that need to be removed when replacing it. Next, unplug the electrical connector at the top of it, lift up on the tab and then pull out on the connector. Now You have to disconnect the vacuum line going in at the bottom of it. Take a flat blade screwdriver and push it in a little bit on one of the tabs on the side and then pull the hose off. There is an o-ring on the bottom of the valve they can stick a little, just wiggle it while pulling up to remove it.
Not finding what you are looking for?