Hyundai Cars & Trucks - Page 7 - Recent Questions, Troubleshooting & Support
Cylinder head torque settings for stretch bolts
those are called TTY bolts, not to be reused.
TTY = torque to Yield.
1,2 liters.
The i10 also came with a 1.2 liter gasoline Euro 5 compliant engine (called the
Kappa engine) DOHC petrol
real name (engine)
G4LA made in india.
sorry no books here on india cars.
contact Hyundai dealer in your country and get the service manual.
What is the Valve clearance for a 2014 Hyundai Santa Fe sport 2.0 Turbo vin A
what clearance is this.???? valves and all related parts all have clearances.
Head poppet valve stem to guides or what?
we can't see your engine and what level of disassembly to know what you are attempting,.
are you asking how HLA work? or installed or what?
true name of engine is Gas or diesel? 2.0 L
R II CRDi I4
Theta II 2.0 T-GDi
sorry VIN A im too lazy to look up now.
DOHC, twin cam.
has MLA(Mechanical Lash Adjuster),
i guess you mean MLA CLEARANCE ONLY .at #9
see lash next from SM
Hyundai Atos ( manual) dosen't pick up speed and jerks
Hi there, it could be a change of spark plugs will solve your problems. I'm driving one too but found that it jerked when accelerating. So I read up and presumed that the old plugs might be the cause. After changing new spark plugs, it doesn't jerk anymore.
2011 hyundai sonata fuel problems?
you forgot to clean or buy new injectorsbtw, no engine told at all and is an engine question.the line up is2.0 L Nu MPi I42.0 L Theta II MPi I42.0 L Theta II Turbo GDi I42.4 L Theta II MPi I42.4 L Theta II GDi I42.0 L Nu LPi I42.0 L Theta LPi I4the fuel tank must be fully flushed out firstand all fuel lines.and last injectors. cleaned from rear to front car direction only.buy a locking gas cap. (for next time)GDi and be super hard to cure. direct injected.your not told VIN shows engine code.best is now what is there. first.
Clearance pistons H100 Diesel
THERE 2, READING,
ONE INLINE IF PISTON PIN
AND ONE 90DEGRESS FROM THAT.
PISTONS ARE NOT ROUND THEY ARE CAM GROUND/MILLED
THE SERVICE MANUAL COVERS ALL THAT.
Hyundai Grace diesel H100
NO YEAR TOLD THE MANUAL IS BY YEAR, AND MODEL AND COUNTRY.
1968 TO PRESENT MADE
GRACE 1986 IN KOREA.
3 ENGINES , NO COUNTRY TOLD AND BOOKS ARE BY COUNTRY AND YEAR GRACE
CALL UP OEM Hyundai, AND BUY THE MANUAL
Diesel engine's:
2476 cc 4D56 I4
2476 cc 4D56 TD I4 (TURB0) YES TURBO'S CAN HAVE DIFFERENT PISTIONS
2607 cc D4BB I4 (China)
Multiple codes all at once.
NOW SOLVED !
well the 6 code are covered in the service manual.
read that yet?
not told at all if car drives ok day and night.????
P200A Intake Manifold Runner Performance (Bank1)
C1283 Yaw Rate & Lateral G Sensor-Signal
C1513 Brake switch error
C1102 Battery Voltage Low but you pulled the battery so......normal
c1702 faulty HECU? is ABS PUMP ERROR, AND SEE RECALL ON IT.
C1260 Steering Angle Sensor Circuit-Signal
IS ABS LAMP GLOWING IN DASH IGNORED?
GET ABS FULLY SCANNED.
Im driving a hyundai atos 1.1 2005-2007 model was recently serviced but one plug isn't firing proper nd its consuming fuel nd plus no power as it jerks especially on the 3rd gear
1.1L: G4HG ENGINE REAL NAME.no car on earth has 3 years. for 1 car. but good enough.scan it first to see which one fails2002 up in Europe (are you) is OBD2 compliant tools work. there.that means a cylinder is dead. now all the others must drag around a dead cylinder, with more than 1/4 HP lostand GROSS misfiring is violent and lots of fuel wastedand burned up CAT converter as a door prize./there are only 3 causes classical now for 100 year gas engines,otto cycle ,tech.compression on #3 is dead,(not 150 PSI UP)spark dead on #3injector dead or leaking super bad on #3there are 3 tests and 3 tools to learn which it is.why not get the car repaired in a real shopyou do not have the tools to find it?in USAour cars have OBD2and scans shows what cylinder are dead.p0301 = cyl1, p0304 cyl4p0300 means all misfire at randomTHE G4HG., HAS 1 COIL PACK WITH 4 HV LEADSTHOSE HV WIRES SETS TO IT ARE NO GOODTHIS OLD NOR 18 YEAR OLD SPARK PLUGS!! ever!REPLACE THE HV WIRES 1 BY 1, OR THE FIRING ORDER WILL BE WRONG AND GET A 2 CYLINDER ENGINE AS A PRIZEYOUR ENGINE NEEDS WORK FORGET THE JERKING .fix engine, it is begging to be fixed, for sure.FIND A REAL SHOP, GET IT DIAGNOSEDUSING REAL TOOLS , NOT GUESSING
Replaced ignition on 2006 Hyundai Azera and car won't start. Battery is fine and starter is fine.
USA CAR RIGHT, IF NOT SAY SO THERE ARE 8 ENGINES USED World wide. (WWW posted to world)
NO miles told, ODOMETER> 200k miles ++++++++
cranks fast but will not start. (50 causes)
what does replaced Ignition mean???
can you be more clear on that, we can not just guess.
blind
8 new spark ign coils?
8 new spark plugs
new CMP and CKP sensors.
new ignition switch? and now IMMO is very unhappy?
what?
scan it yet.
NO ENGINE TOLD guess. 3.8L V8 in USA it it ? USA??????
aka
3.8L (G6DA) engine. same as KIA.
I guess timing chain is not bad, if it made NO noise before engine died??????
scan the PCM yet just after cranking it.
3.8L is an interference engine
if this is your dead engine????????
we check cam timing first,and VVT too not bad.
to avoid more damage cranking away and bending over head valves.
we can not guess engines, ever.
but the VIN tells me what is there
VIN digit #8 is engine code.
My 2006 hyundai azera will not start after replacing ignition cylinder?
Most later model cars have security immobilizers built into the keys to prevent someone from hot wiring the car. You can't just replace the key and cylinder unless they are reprogrammed to your car. The only way you can is to swap the corresponding ECU and immobilizer modules from the donor vehicle from which the key/tumbler came.
Hope this helps,
Scott
Europartsplus.com
Not finding what you are looking for?