Hyundai Elantra - Recent Questions, Troubleshooting & Support
Elantra Steering Wheel Noise
Check and make sure that your power steering fluid is topped off. Could possibly problems with your power steering pump. Mine does the same and the fluid is full. I just keep an eye/ear on it. If it continues to get worse than it could be the pump going out. If the fluid is allowed to get too low, it could possibly get air in it affecting both the "feel" of the steering and making a noise.
2011 Hyundai Elantra 1.8L New engine but car doesn't move
It sounds like the issue with your 2011 Hyundai Elantra might be related to the output shaft speed sensor, especially since you're getting a P0722 error code. This sensor is crucial for the transmission's ability to shift gears correctly. Since the transmission was working fine before the engine replacement, it's possible that a connection to the sensor may have been disrupted during the process. I would suggest double-checking the sensor's connection and wiring for any signs of damage or loose connections. Also, ensure that there's no physical damage to the sensor itself. If everything seems intact, it might be a good idea to have the sensor tested or replaced.
Knock sensor
Nope. The knock sensor detects knocks in the engine and retards detonation in the timing.
Car not shifting would be bad vacuum operated actuator on outside of tranny or bad syncros or other internal transmission parts
Cd player
press and hold eject....is there a cd in it?
Dashboard lights/A C Display/BluetoothRadioPhone Monitor
some cars the dash has autodimmer
a sun sensor on the dash
some can be disabled , so read the users guide
to do that.
most cars, we can disable the out dim
in the free users guide, search word DIM.
bingo,? see on,off ,up ,down or auto?>
find the top of dash sun sensor
shine a very bright light there, and dash DIM goes full bright, if yes, bingo
see the users guide in the glove box yet
page 5-42 is your answer
see the words obstructs either sensor
bingo
it is in your manual this.
https://www.carmanualsonline.info/hyundai-elantra-2022-owners-manual/?srch=dim
What's does it mean when your P,R,N and D gears are blinking?
This usually indicates a problem with the transmission control module (TCM). You should have a qualified mechanic inspect and diagnose the problem, as it could be something as minor as a faulty TCM or something more serious such as a transmission failure. Replacement of the TCM or other components may be necessary to fix the issue.
2013 Hyundai Elantra radio goes black/flashes back on. Why?
This issue sounds like it could be related to a problem with the ground connection or the reverse gear sensor in your 2013 Hyundai Elantra. The radio may be losing power when the reverse gear is engaged and the car is on a hill, causing it to cut off and then come back on. Here are some things you can try:
- Check the ground connection for the radio. Make sure it is tight and securely connected.
- Check the wiring for the reverse gear sensor. Make sure it is properly connected and not damaged.
- Inspect the reverse gear sensor itself to make sure it is not malfunctioning.
- Check the voltage of the battery, low voltage can cause the system to shut off
- If none of these solutions work, it is recommended to have your vehicle inspected by a professional mechanic.
It is also important to have a professional diagnose this issue as it could be caused by multiple other electrical issues and a proper diagnosis is needed to find the root cause and prevent further damage to your vehicle.
Car wont start but lights work
Please provide with more detail. Does it make a click sound when turning the ignition? Does it crank?
Have you tried to jump the battery with jumping cable or tried it on a know good batteries?
- If the car does make a cranking noised then the starter is good but weak battery.
- If there is no noise or clicking, then dead battery.
- If you can hear the clicking when turning the key to start, then check for battery GROUND.
- If battery were tested and it read 12.5 - 14.0 DCV. Then your starter are bad.
There also other thing to check like security alarm system with ignition switch kill... But most common problems with fail to start are mention above.
Not finding what you are looking for?