Question about Polaris ATV
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Adjusting front suspension
yes you are going to need a technical manual with the gauged settings of the factory. This will set to default factory and you can then adjust to what the setting adjustments are to fit your confort.
Posted on Jan 30, 2009
Usually on these types of clasps, there is a little metal tang with a notch on the inside of the part that the worded end of the clasp slips over a bar. Under that bar is where you lift up the notched tang. After you lift it up, using a miniscrewdriver or watch knife, you can then slide the attachment to the desired band length. Then push the tang back down to lock it.
Posted on Apr 15, 2009
the high idle could be a dirty needle check your carbs i have that problem with my 550 rmk the reverse light could be your wire harness check your wires with any wire tester idk the specs for it but also clean your connections with some electrical wire component cleaner and use so di-electrical grease if all else fails you may need to bring it to a mechanic for a small fix like that it should run up that high
Posted on Aug 14, 2009
sounds like the belt is wrong size. double check this,and if it is correct size make sure the secondary clutch is closing all the way.
Posted on Feb 09, 2010
Tips for a great answer:
Dec 01, 2015 | Polaris 2010 WideTrak 600 IQ
Mar 01, 2015 | Polaris 2012 LXT 550 IQ
Feb 15, 2015 | 2015 Polaris IQ LXT 600
Jan 03, 2015 | Polaris 2013 LXT 550 IQ
May 16, 2014 | Polaris 2012 LXT 600 IQ
Feb 28, 2014 | Polaris ATV
Mar 20, 2013 | Polaris 2007 IQ Touring 600 HO CFI
15 people viewed this question
Usually answered in minutes!