20 Most Recent Suzuki 2007 KingQuad 700 4X4 Questions & Answers

Running lean to much air to engine

Jack up the back as high as possible and then let it fall. Do this over and over until it shows full. That is what I did and it's fine now.

Check for a broken wire around the steering column.

Here is a forum that discusses the need to replace or not the bolts because of stretching and also gives the torque for the bolts. http://forum.highlifter.com/700H1-head-bolts-Specs-m4583146.aspx

Alternator is out.

Radiator maybe stopped up, try to take it off and clean it out. If you find no problems, you may want to put a manual switch to cut your fan on/off in addition to the auto switch.

The hose between the carburator and the block is probably cracked and sucking in air. Sometimes you can just put some electrical tape around it and it will work for a while, but it may need replaced.

get a garage to do it ,as you can kill your engine if you get it wrong.

master fuse poss blown, If you need further help, reach me via phone at https://www.6ya.com/expert/allen_b068623c5003aa4b

Make sure you have the CORRECT spark plug... use what the owners manual says... NGK.. . A non - resistor plug will make some motors sputter at high rpm's ...if the quad calls for a "R" plug..use one!